Bridges

Let’s Bring Your Project to Life

We offer a wide selection of prefabricated bridge styles to meet your project needs.

Leave a lasting impression with one of the following bridge designs.

CAMBRIDGE

Bridge

This is a Warren Truss girder bridge that is formed by a top chord with a polygonal (camelback) shaped geometry. This truss eliminates verticals at the top chord panel points. It is an efficient use of steel and one that is a classic choice for rural or industrial settings.

View Full Specification

Build Your Bridge Now

Find A Representative

CAMBRIDGE FLAT

Bridge

This is a Warren Truss girder bridge that is formed by a top chord with a parallel chord (flat) geometry. This truss eliminates verticals at the top chord panel points. It has a sturdy look and is a great choice for multiple span bridges or bridges set in urban or rural settings.

View Full Specification

Build Your Bridge Now

Find A Representative

SENECA

Bridge

This bow-string Pratt Truss girder bridge is formed by mechanically curving the top chord into an arch shape along a parabolic curve. It has vertical members at every panel point which shrinks the floor beams and minimizes or eliminates stringer beams.

View Full Specification

Build Your Bridge Now

Find A Representative

VIKING

Bridge

This modified bow-string arch style is configured from a Pratt Truss using vertical end posts. It is similar to the Seneca style, with vertical members at every panel point which shrinks the floor beams and minimizes or eliminates stringer beams.

 

View Full Specification

Build Your Bridge Now

Find A Representative

THRU TRUSS

Bridge

The Thru Truss describes high or box truss bridges. It involves portal frames which increases their span capability. In doing so, the vertical clearance above the bridge’s roadway sets the truss height. Because of the deeper truss girders, shipping of full-depth pre-assembled sections is challenging and many times not available. The pre-assembly is usually limited to attaching gusset plates to the chord members with vertical and diagonal members being added in the field.

View Full Specification

Build Your Bridge Now

Find A Representative

LIBERTY

Bridge

This bridge is made from prefabricated panels and assembled into modules. It follows the constant depth form of the Voyager (Pratt Truss) but is designed to be containerized and easy to construct. It is preferred as a permanent or emergency installation and for owners with large inventories.

View Full Specification

Build Your Bridge Now

Find A Representative

VOYAGER

Bridge

This constant depth truss style is configured from a Pratt Truss using parallel chord members and vertical end posts. The Voyager functions perfectly as a vehicular bridge on driveways or enhances recreation areas or park lands where light traffic is experienced.

View Full Specification

Build Your Bridge Now

Find A Representative

CORTEZ

Bridge

This is a simple span beam bridge that supports a concrete deck slab and stay-in-place forms, or a bridge plank and asphalt system. It is a short span solution that is very competitive with prestressed concrete alternatives, especially when member weight and dead loads are a concern.

View Full Specification

Build Your Bridge Now

Find A Representative